Shows the number of packets translated and discarded in the Network Address Translation (NAT) VLAN egress and ingress directions.
| ip | Shows Internet Protocol (IP) information. |
| nat | Shows NAT information. |
| vlan | Shows VLAN NAT information. |
| counters | Shows NAT VLAN counter information |
| vlan_name | Specifies which VLAN to show NAT information for. |
N/A.
Source translations and discards constitute the packet counts in the egress direction. Destination translations and discards constitute the packet counts in the ingress direction.
To clear counters, run the command clear ip nat counters vlan {vlan_name}.
The following example shows NAT VLAN counter information:
# show ip nat vlan counters
Source Source Destination Destination
VLAN Name Translations Discards Translations Discards
================================ ============ ============ ============ ============
out 203284 0 0 0
in 0 0 0 0
This command was first available in ExtremeXOS 31.2.
This command is available on the switches that support the IP NAT feature. For information about which switches support this and other features, see the Switch Engine v33.1.1 Licensing Guide document.